Raita Arena Shields


Marshall's International

Seamless Glazing

The VIEWMAX seamless glazing system is the best solution for multi purpose arenas. It does not have any glazing posts. The VIEWMAX significantly improves the spectator’s and TV audience’s view and the outward appearance of the rink. The upper part of the dasher frame on HORNIUM dasher board has a special glass fastening system which holds the glass firmly on place.

The VIEWMAX seamless glazing system is available with the HORNIUM dasher board system.

Alusafe Glazing Supports

The ALUSAFE post supported glazing is suitable for ice hockey arenas where the need for conversions is less frequent than in multi purpose arenas. The anodised ALUSAFE is designed to be safe, good looking and easy to use. Supporting posts are attached to the frame and glass is supported by them. Protective shields are placed into the slot between the post and the locking plate, which is fastened to the face of the post. Posts are used with single frame dasher board systems.

HDR (The Heavy Duty Release post) – posts are fastened into the steel frame with sockets. Posts are quick to install and remove. The frame sockets are installed on the dasher board frame during the first installation. In the aluminium systems, posts are pre-installed through the top sill. Over 20 years of work, experience and development in glazing support and and tempering of the glass has given us the lowest glass brakeage rate in the industry.

Steelsafe Glazing Supports

The STEELSAFE post supported glazing is the most popular system with steel frame dasher boards. The STEELSAFE supported glazing is suitable for ice hockey arenas where the need for conversions is rare. STEELSAFE is designed to be safe and easy to use. STEELSAFE – glazing support consists of two components:

  • A hot-dip galvanized tubular steel post
  • Flat anodised aluminium facing profile with rounded corners

STEELSAFE posts are hot-dip galvanized according to the SFS-EN ISO 1461 standard for maximum corrosion resistance. inside surface is smooth, safe and doesn’t cause any difficult puck bounces. Supported glazing is solid, resilient and safe. Our glazing breakage rate is very low. STEELSAFE glazing supports and glasses are easy to install, remove and store and after re-install they still work perfectly.

Polycarbonate Cassette Shields

Polycarbonate cassette shields have been recognised among the customers for their simplicity and easy manner of installation. Polycarbonate cassette shields are user friendly and the system is light and easy to handle. It is suitable for small competition and training level arenas. Polycarbonate cassette shields are made of 8mm polycarbonate sheets that are supported by a steel frame. They are strongly made and safe to use. The steel frames of the polycarbonate cassette shields are welded of tubular steel and are hot dip galvanised. Polycarbonate shields are standing in the grooves of the polyethylene U-profiles freely. They will not crack or pop out. Polycarbonate cassette shields are installed into sockets, that are attached to the frame of the dasher section. Installation is quick and easy. The sockets are detachable. Therefore the cassettes can be upgraded into post supported glazing if needed.

Steelnet Cassette Shields

Steelnet cassette shields are suitable for schools and leisure rinks. They have been recognised among the customers for their simplicity and easy manner of installation. Steelnet cassette shields are made of extremely strong galvanised steel (3mm wire). The size of the mesh is 4omm x 40mm. The frame is made of galvanised tubular steel. The net is fastened to the steel frame with a riveted flat steel bar. Net cassettes are installed into sockets, that are attached to the frame of the dasher section. Installation is quick and easy. The sockets are detachable. Therefore the cassettes can be upgraded into post supported glazing if needed. The cassette size always matches the section size. Steelnet cassette shields are compatible with ALL STAR and STADIUM dasher board systems.

Raita HDHT

The tempered glass that we use is toughened by the American tempering method. The principle has been recognised as the best method available. Raita Sport uses its own tempering recipe (HDHT), which has given us the lowest glass breakage rate in the industry.

Our standard glass is 12mm and 15mm thick and it meets the DIN 18036 standard.