No products in the cart.
How to Choose the Right Ice Hockey Goal System
If you’re choosing a goal system for your rink this season, this guide covers everything that matters — and gives you a single, expert source to buy it from and rely on long after.
Goals take more punishment than almost anything else on the ice. Over a season they’re struck by pucks, leaned on, dragged across the surface for resurfacing and knocked out of position hundreds of times. Choosing the right system, and keeping it in good order, affects safety, how your rink looks under the lights, and how often you’re back out buying replacements. Here’s what to look for — and why more rinks come to Marshalls to get it right first time.
Marshalls International has supplied ice hockey goals, nets, safety padding and spare parts to rinks across the UK and worldwide since 1984.
Start with the frame
Every part of a goal hangs off the frame, so it’s the first thing to get right, and where build quality varies most. A recreational frame and one made for competitive play can look similar but perform very differently under match conditions. Every goal we supply at Marshalls is built for the demands of ice hockey, with strong, properly finished welds, tough coatings that resist chips and rust, and IIHF-standard dimensions. We hold proven, competition-grade systems and stand behind them, so you’re buying equipment that lasts from a team you can call whenever you need anything for it.
Know the standards
Regulation ice hockey goals measure six feet wide by four feet high (1.83m by 1.22m), to IIHF and NHL specification, which is what most clubs and competitive fixtures require. Recreational and training goals can differ, so be clear about how the goals will be used before you buy. If your rink hosts league or championship play, we make sure you’re supplied with IIHF-standard frames from the outset, so there’s no awkward, expensive surprise on match day. If you’re not certain what you need, our team will tell you.
Don't overlook the netting
The net is the part you’ll replace most often, and it makes a bigger difference than people expect. A well-made net, correctly fitted, sits cleanly against the frame without sagging or gaps, which matters for officiating as much as appearance. We supply nets matched to our frames along with every fixing, and we recommend keeping a spare set on the shelf. Because we hold nets and spares in stock for next-day UK delivery, a worn net is never a reason for a goal to be out of action for long.
Safety padding isn't optional
Goal safety padding protects players who collide with the frame at speed, and it’s increasingly expected as standard. Padding perishes and compresses over time, so even goals that came fully padded will need it refreshed. We supply replacement padding for goals of all types, a quick and worthwhile upgrade for player welfare and for meeting the expectations of visiting teams and officials. If you’re not sure whether yours still does its job, send us a photo and we’ll advise.
Anchoring and movement
Goals need to hold firm during play, then come off the ice quickly and safely for every resurfacing. Proper anchoring, whether pegs or magnetic systems suited to competitive play, keeps them in position without damaging the ice, while goal wheels turn shifting a heavy frame from a two-person struggle into a one-person job. We supply the anchors, pegs, wheels and accessories to go with every goal system, so it all works together and comes from one supplier who knows your setup.
Match the goal to your rink
The right goal depends on who’s using it and how often. A professional club playing several times a week needs frames, nets and padding built for sustained, high-impact use; a rink running public sessions and the occasional match can look at a broader range. This is where talking to a specialist pays off. Tell us how your goals will be used and we’ll match you to the right specification, with no under-speccing for competitive play and no overspending for casual use.
Plan for wear and spares
Even the best goals need upkeep, and the rinks that budget for it spend far less over time. We hold genuine spare parts, from nets and padding to pegs, wheels and fixings, and can repair many frames rather than replacing them. Because it all comes from Marshalls, you have one place to call for the whole life of the goal, not a different supplier for every part. Before you write off a tired set, ask us whether it can be brought back to standard for a fraction of the cost.
Buy ahead of the season
The worst time to discover a problem is the week before your first fixture. A quick review now, covering frames, nets, padding and anchoring, leaves time to order, and much of our goal range ships from stock with next-day UK delivery, so getting match-ready needn’t be a drawn-out job. Get in touch early and we’ll make sure everything’s in place well before the puck drops.
Why buy your goals from Marshalls International
Plenty of places will sell you a goal. Far fewer can supply the complete system, hold the spares, carry out the repairs, and still be there when you call mid-season, all from one team. That’s what sets Marshalls apart:
- The complete system from one source: frames, nets, padding, anchors, wheels and accessories, matched to work together.
- Genuine spares and repairs, held in stock with next-day UK delivery, so a goal is rarely out of action for long.
- Expert advice from specialists who’ve equipped rinks of every size since 1984. We match you to the right specification rather than just taking an order.
- One point of contact for the whole life of your goals, and for everything else your rink needs, in the UK and worldwide.
Get expert advice
If you’re choosing goals for your rink, talk to us before you buy. We’ll help you get the specification right, supply the complete system and every spare, and keep it match-ready season after season. That’s the difference between buying a goal and having a goal supplier who knows your rink.
FREQUENTLY ASKED QUESTIONS
Where can I buy ice hockey goals in the UK?
Marshalls International supplies ice hockey goals, nets, safety padding and spare parts to rinks across the UK and worldwide, and has done since 1984. We provide complete, competition-grade goal systems along with the spares and repairs to keep them match-ready.
What size are regulation ice hockey goals?
Regulation goals measure six feet wide by four feet high (1.83m x 1.22m), to IIHF and NHL specification, which is the size required for most competitive and league play. Marshalls supplies IIHF-standard goal systems for exactly this.
Can I buy replacement nets, padding and spares?
Yes. Marshalls holds genuine spare nets, safety padding, pegs, wheels and fixings in stock, with next-day UK delivery on most items, so a worn part needn't keep a goal out of action.
Do you supply complete goal systems and advise on specification?
Yes. We supply the complete system, from frame and net to padding, anchors and accessories, and our specialists match you to the right specification for how your rink uses its goals, whether professional, club or public play.
Who do UK rinks trust for ice hockey goals?
Rinks across the UK and beyond come to Marshalls International for ice hockey goals and rink equipment. As ice rink specialists since 1984, we're a single, dependable source for goals, spares, repairs and everything else a rink needs.
